Manuals / Alcatel-Lucent / Computer Equipment / Switch

Alcatel-Lucent 6300-24 Warnings and Cautionary Messages, Environmental Statement, Documentation

Models: 6300-24

1 58

Download 58 pages 48.23 Kb

Page 9

Warnings and Cautionary Messages

Warning: This product does not contain any servicable user parts.

Warning: When connecting this device to a power outlet, connect the field ground lead on the tri-pole power plug to a valid earth ground line to prevent electrical hazards.

Warning: This switch uses lasers to transmit signals over fiber optic cable. The lasers are compliant with the requirements of a Class 1 Laser Product and are inherently eye safe in normal operation. However, you should never look directly at a transmit port when it is powered on.

Caution: Wear an anti-static wrist strap or take other suitable measures to prevent electrostatic discharge when handling this equipment.

Caution: Do not plug a phone jack connector in the RJ-45 port. This may damage this device. Les raccordeurs ne sont pas utilisé pour le système téléphonique!

Caution: Use only twisted-pair cables with RJ-45 connectors that conform to FCC standards.

Environmental Statement

The manufacturer of this product endeavours to sustain an environmentally-friendly policy throughout the entire production process. This is achieved though the following means:

•Adherence to national legislation and regulations on environmental production standards.

•Conservation of operational resources.

•Waste reduction and safe disposal of all harmful un-recyclable by-products.

•Recycling of all reusable waste content.

•Design of products to maximize recyclables at the end of the product’s life span.

•Continual monitoring of safety standards.

End of Product Life Span

This product is manufactured in such a way as to allow for the recovery and disposal of all included electrical components once the product has reached the end of its life.

Manufacturing Materials

There are no hazardous nor ozone-depleting materials in this product.

Documentation

All printed documentation for this product uses biodegradable paper that originates from sustained and managed forests. The inks used in the printing process are non-toxic.

ix

Image 9

Alcatel-Lucent 6300-24 Warnings and Cautionary Messages, Environmental Statement, End of Product Life Span, Documentation

Contents

Getting Started Guide OmniStackThis Manual documents OmniStack 6300-24 hardware and software This equipment has been tested and found to comply with the limits for Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions in this guide, may cause interference to radio communications. Operation of this equipment in a residential area is likely to cause interference, in which case the user will be required to correct the interference at his own expense Page Compliances and Safety Warnings FCC - Class BEC Conformance Declaration - Class B Japan VCCI Class B Industry Canada - Class BUnderwriters Laboratories Compliance Statement Safety ComplianceWarning Fiber Optic Port Safety Warnhinweis Faseroptikanschlüsse - Optische SicherheitWichtige Sicherheitshinweise Germany Environmental Statement Warnings and Cautionary MessagesEnd of Product Life Span Manufacturing MaterialsPurpose Related PublicationsThe OmniStack 6300 User Guide Contents Appendix C Specifications Appendix A TroubleshootingAppendix B Cables Glossary IndexTables Tables Figures Figures Chapter 1 Introduction Switch ArchitectureOverview Network Management OptionsDescription of Hardware 10/100/1000BASE-T PortsSFP Slots Figure 1-2. Port LEDs Status LEDsTable 1-1. Port Status LEDs ConditionPower Indicator Redundant Power IndicatorDiagnostic Indicator Optional Backup Power Supply Power Supply ReceptaclesFeatures and Benefits Manages switch in-band or out-of-band “At-a-glance” LEDs for easy troubleshooting Network management agentManagement Supports Telnet, SNMP/RMON and Web-based interfaceChapter 2 Network Planning Introduction to SwitchingCollapsed Backbone Application ExamplesFigure 2-2. Network Aggregation Plan Network Aggregation PlanFigure 2-3. Remote Connection with Fiber Cable Remote Connection with Fiber CableFigure 2-4. Making VLAN Connections Making VLAN ConnectionsApplication Notes Chapter 3 Installing the Switch Selecting a SiteEthernet Cabling Package Contents Equipment ChecklistOptional Rack-Mounting Equipment RJ-45 ConnectorRack Mounting MountingDesktop or Shelf Mounting Figure 3-3. Installing the Switch in a RackFigure 3-4. Attaching the Adhesive Feet Installing an Optional SFP Transceiver into the Switch Connecting to a Power SourceConnecting to the Console Port Figure 3-6. Power ReceptacleFigure 3-7. Serial Port DB-9 DTE Pin-Out Table 3-1. Serial Cable Wiring Wiring Map for Serial CableSwitch’s 9-Pin Null Modem3 Installing the Switch Connecting Network Devices Connecting to PCs, Servers, Hubs and SwitchesChapter 4 Making Network Connections Twisted-Pair DevicesFigure 4-2. Network Wiring Connections Network Wiring ConnectionsFigure 4-3. Making LC Port Connections Fiber Optic SFP DevicesConnectivity Rules 1000BASE-T Cable Requirements1000 Mbps Gigabit Ethernet Collision Domain 100 Mbps Fast Ethernet Collision Domain 10 Mbps Ethernet Collision DomainCategory 5 or better 100-ohm UTP or STP Cable Labeling and Connection Records Diagnosing Switch Indicators Appendix A TroubleshootingPower and Cooling Problems InstallationA Troubleshooting Appendix B Cables Twisted-Pair Cable and Pin Assignments10BASE-T/100BASE-TX Pin Assignments Cable Testing for Existing Category 5 Cable 1000BASE-T Pin AssignmentsAdjusting Existing Category 5 Cabling to Run 1000BASE-T Fiber StandardsB Cables Physical Characteristics Appendix C SpecificationsCE Mark CompliancesGlossary Glossary-2 GlossaryLocal Area Network LAN Glossary-4 GlossaryNumerics IndexPage Page 060190-10