Alcatel Carrier Internetworking Solutions ACT 250 instruction

Commissioning

ACT 250 controller electrical connections

ATP 150 or ATP 400 pump

■If the controller is remote controlled, make the various connections on the REMOTE connector (see page 13 for wiring details).

■If the controller is used in local mode, the

pump can only operate if the connector plug (ordered separately) is connected to the REMOTE

connector (see page 13 for wiring details).

PC

Connect the fan (air-cooled ATP)

Connect the controller to the pump using the cable (ordered separately)

RS conﬁguration

Remote cable

or

Connector plug (standard wiring) to use the unit in local mode.

Connect the RS232/485 serial link cable to the connector (cable and PC supplied by customer)

January 2001

Connect the controller to the mains (cable ordered separately).

An earth connection must be provided.

10	Alcatel Vacuum Technology France - ACT 250 addendum

Image 11

Alcatel Carrier Internetworking Solutions user manual ACT 250 controller electrical connections

Contents

ACT Contents Use Syntax conventions applicable to all commands ACT 250 controller Presentation Europe 108936 108948 Accessories108935 ACT 250 box controller control modes Local control modeRemote control There are three possible remote control modes ACT 250 OEM controller control modes ACT 250 box dimensions in mm ACT 250 controller technical characteristics ACT 250 OEM dimensions in mm Commissioning Safety instructions ACT 250 controller electrical connections Principle of voltage- controlled optocoupled inputs ACT 250 remote connector characteristicsVoltage control mode Ext. safety Select Mode Signalling on output contacts Use in remote control mode ACT 250 remote connector wiring Baud rate 9600 4800 Wiring the RS 232 or RS 485 serial linkRS 232 / 485 serial link Parity Result #aaa,ok or Err2 Detailed description of RS commandsSyntax conventions applicable to all commands Result #adr,ok,S For Ckson #adrCKSOFFCRLF Result #adr,ok or Err2 Enables DataLogger operation RS232 only Software version IDN#adrECHOFFCRLF Identiﬁes the device which is communicating, and its Syntax Result LEVLNG NSP Syntax Result See also SEL OPTRPM SAV A reply Syntax #adrSEPnnnCRLF Result #adr,ok or #adr,ErrX If errorSEL Deﬁnes the character which separates the parameters Syntax Result See also LEV SETSHT SPD Deﬁnes the turbomolecular pump operating state TMP Controlling the pump from the ACT 250 controller Use Starting the pump with the Start switch Indication of rotation during operation controller on Precautions Local mode operationController functions Use Japan FranceGermany Italy