Alcatel Carrier Internetworking Solutions ACT 250 user manual Tmp

Commissioning

Detailed description of RS commands

STA Returns the status of the internal dynamic parameters

Syntax #adrSTA<CR>[<LF>]

Result #adr,xxxxxx,yyyyyy,zzzzzz,sssss,iiii,www,ppp,vvv,ttttt<CR><LF>

adr: address

543210

xxxxxxstatus bits:

5 - RS echo (1->off)

4 - String long (0) / short (1)

3 - On (1) / Off (0)

2 - reduced or nominal speed reached(1)

1 - standby (1)

0 - running-in (1)

zzzzzzalert bits:

5 - reserved (future use)

4 - reserved (future use)

3 - variator temperature

2 - motor temperature

1 - start-up time exceeded (future)

0 - operating time exceeded

yyyyyyfault bits:

5 - variator temperature

4 - motor temperature

3 - excess current

2 - sensors or start-up

1 - external

0 - pump not connected

ssssscurrent speed value in rpm

iiiicurrent value in mA

wwwreserved (pwm value)

ppppump temperature value

vvvvariator temperature

tttttpump operating time value

January 2001

Reminder: The “#” character at the start of the reply string can be set with the “HDR” command.

The “,” character which separates the parameters in the reply string can be modified with the “SEP” command.

TMP	Defines the turbomolecular pump operating state
Syntax	#adrTMPON<CR>[<LF>] : start pump rotation
	#adrTMPOFF<CR>[<LF>]: stop pump
Result	#adr,ok or #adr,Err3	if the pump is already in the state
		requested (context error)

Alcatel Vacuum Technology France - ACT 250 addendum 23