Alcatel Carrier Internetworking Solutions ACT 250 user manual Sel, A reply Syntax #adrSEPnnnCRLF

Commissioning

Detailed description of RS commands

SBY Switches the speed set point to the stand-by value

Syntax #adrSBY<CR>[<LF>]

Result #adr,ok

See also: NSP, RPM

SEL

Syntax

Result

Resets the stand-by speed to its last stored value, and allows it to be modified if an “RPM” command is sent.

This configuration is automatically stored in user memory.

Returns the state of the parameters defined by OPT

#adrSEL<CR>[<LF>]

#adr,a,u a: Reserved

u: Returns the choice of temperature unit::

u = 0: degrees Centigrade u = 1: degrees Fahrenheit

January 2001

SEP	Defines the character which separates the parameters
	in a reply
Syntax	#adrSEPnnn<CR>[<LF>]
	3-digit decimal value of the ASCII code of the desired char-
	acter (with leading zeros if necessary).
	condition: 000 ≤	nnn ≤ 255
Result	#adr,ok or #adr,ErrX	if error
	Allows the user to select the character which separates
	the parameters returned by the DLR, STA and LEV
	commands. Default value: comma “,” ASCII code = 044
	If ok, the selected value is automatically stored in user memory.

Alcatel Vacuum Technology France - ACT 250 addendum 21