Effects Parameters 139

03D—Owner’s Manual
MONODELAY->REVAMP SIMULATE
1. STK-M1, STK-M2, THRASH, MIDBOOST, CMB-PG, CMB-VR, CMB-DX, CMB-TWN,
MINIAMP, FLAT
2. DST1, DST2, OVD1, OVD2, CRN
Parameter Range Description
DELAY 0.1–1000.0 ms Delay time.
FB.DLY 0.1–1000.0 ms Feedback delay time.
FB.GAIN -99 to +99% Feedback amount.
HI.RATIO 0.1–1.0 High frequency portion of the feedback, expressed as a
ratio relative to FB.GAIN.
REV.TIME 0.3–99.0 s Length of reverberation.
INI.DLY 0.1–500.0 ms Delay time until the early reflections of the reverb are
heard.
HI.RATIO 0.1–1.0 Length of reverberation for the high frequencies, expressed
as a ratio relative to REV.TIME.
DIFF. 0–10 Left/right spread of the reverb.
DENSITY 0–100% Density of the reverb.
HPF THRU,21 Hz–8.0
kHz Cutoff frequency of the high pass filter.
LPF 50 Hz–16.0 kHz,
THRU Cutoff frequency of the low pass filter.
REV.BAL 0–100% Balance between the delay and the delayed reverb. 0 is
only delay.
Parameter Range Description
AMP TYPE 1Select the type of amp.
DST TYPE 2Select the type of distortion.
N.GATE 0–20 Amount of noise gating.
DRIVE 0–100 Depth of distortion.
MASTER 0–100 Master level control.
CAB DPT 0–100% Amount of speaker simulation.
BASS 0–100 Low range tone control.
MIDDLE 0–100 Mid range tone control.
TREBLE 0–100 High range tone control.
EQ F 99 Hz–8.0 kHz Frequency of the parametric equalizer.
EQ G –12 to +12 dB Gain of the parametric equalizer.
EQ Q 10.0–0.40 Bandwidth of the parametric equalizer.