DESCRIPTION OF CONTROLS
When in the EDIT mode, the MIDI button is used to select the send and receive channel for the MIDIVERB III. The range is channel 01 through 16.
Pressing the MIDI button a second time selects if the MIDIVERB III will accept MIDI Program Change commands.
Pressing the MIDI button a third time selects the ECHO On or Off function. This will echo any MIDI information that the MIDIVERB III receives at its MIDI input (except for system exclusive messages that are specifically for the MIDIVERB III) back out its MIDI output.
The MIDI button can also be used to transmit MIDIVERB III programs 100 through 199 via MIDI system exclusive. Simply hold the MIDI button and press STORE.
The MIDI functions are global functions and are not stored with an individual program.
When in the PROGRAM mode, this is button 8 of the keypad for selecting a program by directly entering the desired program number.
MIDI MAPPING
The next two buttons control what is known as MIDI program MAPPING, which means that a MIDI program change number can be mapped to select any of the MIDIVERB III's programs. For example, without MIDI program MAPPING, selecting MIDI program 23 from an external MIDI device would select program 23 on the MIDIVERB III. With MIDI MAPPING, selecting MIDI program 23 on an external MIDI device could be set to select any program on the MIDIVERB III.
The MIDI MAPPING functions are global functions and are not stored with an individual program.
MIDI PROG/9
Part of the MIDI program MAPPING section when in the EDIT mode, the MIDI PROGram button selects a MIDI program number from 000 through 127 that will be received by the MIDIVERB III from an external MIDI controller.
When in the PROGRAM mode, this is button 9 of the keypad for selecting a program by directly entering the desired program number.
INT. PROG/0
13
