SECTION 4
FIGURE 8
| MIDI CONTROLLER SOURCES | ||
CONTROLLER |
| DESCRIPTION |
|
PITCH BEND |
| The pitch bend wheel or lever common on most synthesizers. | |
CONTROLLER #1 |
| The Mod Wheel common on most synthesizers is designated | |
|
| Controller #1 in the MIDI specification. It is called Controller #1 | |
|
| instead of Mod Wheel here since it is easier to display as "1" due to | |
|
| the limits of the 7 segment LED displays. |
|
AFTER TOUCH |
| After a note is depressed, a pressure on the key will cause a MIDI | |
|
| command. This ability is not available on all keyboards. | |
NOTE NUMBER |
| Any MIDI note from keyboard, sequencer, or drum machine. | |
NOTE VELOCITY |
| The target parameter will change in relation to how hard a key is | |
|
| struck. |
|
SUSTAIN PEDAL |
| The | common sustain pedal |
|
| found on most electronic keyboards can be used as a modulation | |
|
| controller. |
|
BREATH CONTROLLER |
| The breath controller found on some electronic keyboards can be | |
|
| used as a modulation controller. |
|
VOLUME PEDAL |
| The | common volume pedal |
|
| found on some electronic keyboards can be used as a modulation | |
|
| controller | (MIDI Controller #7). |
MOD PARAMETER DESTINATIONS
There are 6 parameters of the MIDIVERB III that can be modulated by one of the above source controllers. These are called "targets" or "destinations". They are:
FIGURE 9
MIDIVERB III MIDI PARAMETER TARGETS
PARAMETER | DESCRIPTION |
Reverb Decay | Length of time before the Reverb dies can be modulated. |
Delay Time | Length of time between repeats can be modulated |
Delay Regeneration | Number of echo repeats can be modulated |
Chorus Speed | How fast or slow the Chorus or Flange oscillates can be modulated |
Reverb Level | The output of the Reverb can be remotely modulated |
Delay Level | The output of the Delay can be remotely modulated |
MOD ROUTING DISPLAY
The MIDIVERB III displays exactly which Mod Routing is currently selected via the LED display. Of the three characters that will be displayed, the first character on the left will always indicate which MIDI Controller source has been selected. The second and third characters displays the MIDIVERB III parameter selected.
32
