SECTION 3
CONNECTION TO THE MAIN OUTPUTS
Still another way of interfacing the MIDIVERB III to a mixer or recording console would be
Figure 4).
This setup would be used only if you needed to effect the entire mix.
FIGURE 4
STEREO CONNECTION TO THE CONSOLE MAIN OUTPUTS
MAIN OUT LEFT
LEFT INPUT
MAIN OUT RIGHT
RIGHT INPUT
LEFT OUTPUT
RIGHT OUTPUT
TO MIXDOWN DECK
OR SOUND SYSTEM
SETUP
After you have connected your MIDIVERB III to either an instrument or mixing console:
1)Turn the INPUT LEVEL control up until the green SIGNAL LED Indicator lights (It's OK if the redClip LED occasionally lights, but distortion will result if it remains on constantly).
20