SECTION 4
SECTION 4
USING MIDIVERB III
PROGRAM MODE
When power is first turned on, the MIDIVERB III automatically resets to the Program mode and the last program selected before the power was turned off will be currently selected.
For the purpose of illustration, let's assume that you are turning your MIDIVERB III on for the first time. The MIDIVERB III's front panel should look like this:
000
In the Program mode when initially powered up, note that the front panel will display the following:
A)The PROGRAM LED will be lit, indicating that the MIDIVERBIII is in the Program mode.
B)The display will read the program number, in this case "000".
SELECTING A PROGRAM
There are three ways to select a program on the MIDIVERB III when it is in the Program mode; by using the VALUE buttons, by using the ten keys on the right of the front panel which function as a keypad in the Program mode, or by receiving a MIDI program change (when Program Change has been enabled).
WITH VALUE BUTTONS
If we desire to select program 023, for example, we could simply press and hold the "up" VALUE button until program 023 was displayed. At that point, the MIDIVERB III's front panel would look like this:
22
