USING MIDIVERB III
ro1
3)Select the desired function to be edited. The stored value of the parameter will appear in the numeric display and the button will light up.
In this case we will edit the DELAY TIME. When we select the DELAY button, the display will read:
080
4)Press either VALUE button to adjust the desired parameter.
5)Select another function to be edited, if desired.
PLEASE NOTE:
—Once a parameter has been edited, the dot to the right of the right- most numeric digit will light when in PROGRAM mode (program number displayed and PROGRAM LED lit).
—At this point, selecting a new program either by the VALUE buttons or
the keypad will cause the edited program to be lost. Be sure to save
your program first! | (See next section) |
—The parameters on the bottom row of buttons can be selected when either Edit LED is on.
—At any time you can return to the default selection or value by pressing both VALUE buttons at the same time.
MIDIVERB III PROGRAMMABLE
FUNCTIONS
25
