Optical Drive 23
4
Replace the screws that secure the optical-drive cable connector to the
optical drive.
5
Adhere the optical-drive cable to the optical-drive bracket.
6
Place the optical drive in the optical-drive bay.
7
Tighten the captive screws that secure the optical drive to the computer
base.
8
Slide the optical-drive cable into the connector on the system board, and
press down on the connector latch to secure the cable.
Postrequisites
1
Replace the battery. See "Replacing the Battery" on page18.
2
Replace the base cover. See "Removing the Base Cover" on page15.
3
Follow the instructions in "After Working Inside Your Computer" on page13 .