2Slide the memory module firmly into the connector at a 45-degree angle, and then press the memory module down until it clicks into place.

If you do not hear the click, remove the memory module and reinstall it.

NOTE: Your computer may not boot if the memory module is not installed properly.

3

2

1

4

1

memory-module connector

2

tab

3

notch

4

memory module

3Slide the tabs on the memory-module cover into the slots on the computer base and lower the memory-module cover into place.

4Tighten the captive screws that secure the memory-module cover to the computer base.

Postrequisites

1Replace the battery. See "Replacing the Battery" on page 18.

2Replace the base cover. See "Replacing the Base Cover" on page 16.

3Follow the instructions in "After Working Inside Your Computer" on page13.

32

Memory Module(s)

Page 30
Image 30
Alienware M14XR2 owner manual Tab