Installation/Operation Supplement
European Gas
WARNING
To reduce the risk of electric shock, fire, explosion, serious injury or death:
•Disconnect electric power to the tumbler before servicing.
•Close gas shut-off valve to gas tumbler before servicing.
•Close steam valve to steam tumbler before servicing.
•Never start the tumbler with any guards/ panels removed.
•Whenever ground wires are removed during servicing, these ground wires must be reconnected to ensure that the tumbler is properly grounded.
W002
General Information
This information is to be used when installing gas tumblers in countries, and/or on gases, different than the machine’s factory configuration. Tumblers are supplied from the factory for operation on Natural Gas or L.P. Gas in the countries of GB/IE/PT/ES/IT/GR/ LU/CH. To install machines in any other country, or on any other gas, requires some level of modification.
Models are built in two different configurations:
●Natural Gas – regulated/governor
●Liquefied Petroleum (L.P.) Gas – not regulated/ no governor
Machines configured for Natural Gas (regulator/ governor) may be converted to L.P. Gas (not regulated/ no governor) with
Serial plates are configured for GB/IE/PT/ES/IT/GR/ LU/CH.
16 | © Published by permission of the copyright owner – DO NOT COPY or TRANSMIT | 70278501 (EN) |