Control Instructions

Electromechanical Coin Control

CD and CX Control Suffixes

1.Set the TEMPERATURE selector at HIGH or LOW, or anywhere between these settings.

TEMPERATURE

HIGHLOW

TMB1976N

Figure 5

2.Coin Drop Models: Insert the coin(s) in the coin slot, turn the knob to the right and release it.

INSERT QUARTER

TURN KNOB

25

TMB1489N

Figure 6

Installation/Operation Supplement

3.Press the PUSH TO START button and hold it in for approximately three (3) seconds.

PUSH

TO

START

TMB1488N

Figure 7

IMPORTANT: If the loading door or lint panel door is opened during the cycle, the heating system will shut off and the motor will stop. However, the timer will continue to run. To restart the cycle, both doors must be closed and the PUSH TO START button must be pressed.

4.When the cycle is complete, open door and remove the laundry.

70278501 (EN)

© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT

23