Alliance Laundry Systems 70278501R5EN Manual Timer Control, MT and RT Control Suffixes, 6.When the cycle is complete, open door and remove the laundry

Installation/Operation Supplement

Manual Timer Control

MT and RT Control Suffixes

1.Set the HEAT/DRYING timer for the number of minutes (from 0-60) desired.

0

6010

5.Press the PUSH TO START button in and hold it in for approximately three (3) seconds. This starts the tumbler cycle.

PUSH

TO

START

TMB2146N

50

40

20 HEAT

30

TMB2173N

Figure 12

IMPORTANT: If the loading door or lint panel door is opened during the cycle, the heating system

Figure 8

2.Set the COOL DOWN/COOLING timer for the number of minutes (from 0-15) desired.

0

15

5

COOL

will shut off and the motor will stop. To restart the cycle, both doors must be closed and the PUSH TO START button must be pressed in.

6.When the cycle is complete, open door and remove the laundry.

10

DOWN

TMB2174N

Figure 9

3.Set the TEMPERATURE selector at HIGH, LOW or anywhere between these settings.

TEMPERATURE

HIGHLOW

TMB2175N

Figure 10

4.Select reversing or nonreversing cylinder rotation setting, if applicable.

TMB2145N

Figure 11

24 © Published by permission of the copyright owner – DO NOT COPY or TRANSMIT 70278501 (EN)