Alliance Laundry Systems 70278501R5EN Single Drop Control, SD and SX Control Suffixes, 2.Insert the coin(s) in the coin slot, 3. Press START button to start tumbler

1 32

Installation/Operation Supplement

1.Select HIGH, MED, LOW or NO HEAT by turning the temperature knob.

TMB2147N

Figure 18

25C

TMB1492N

Figure 19

TMB2150N

Figure 20

IMPORTANT: To stop the tumbler at any time during the cycle, OPEN DOOR. To restart the tumber, CLOSE door and press START button.

4.When the cycle is complete, open door and remove the laundry.

70278501 (EN)

Contents

Keep These Instructions for Future Reference (If this machine changes ownership, this manual must accompany machine.) www.comlaundry.com December Page WARNING Contents Introduction Model Identification Wiring Diagram Serial Plate Location Safety Information Save These Instructions Important Safety Instructions Page Specifications and Dimensions Cabinet Dimensions Horizontal Exhaust Outlet Locations Gas Connection Locations Electrical Connection Locations Steam Connection Locations Position and Level the Tumbler Fire Suppression System Water Requirements Water Connections Electrical Requirements Auxiliary Alarm Gas Requirements Natural Gas and Liquefied Petroleum European Gas General Information Page Exhaust Requirements Make-UpAir Venting Electrical Requirements Steam Requirements Thermal Oil Prep Steam Pressure Minimum Pipe Diameter Steam Trap Size bar (PSI) (Pounds Condensate/Hour) Operation Emergency Stop Button on CE Models Operating Instructions Step 1: Clean Lint Screen/Compartment Step 2: Load Laundry Control Instructions Electromechanical Coin Control CD and CX Control Suffixes Manual Timer Control MT and RT Control Suffixes Dual Digital Timer Control QT and RQ Control Suffixes Single Drop Control SD and SX Control Suffixes DMP OPL Control DO Control Suffix DMP OPL Features Programming Reversing Operation DMP Coin Control DV and DX Control Suffixes DMP Coin Features Ignition Control Operation Disposal of Unit