Alliance Laundry Systems 802756R3

-11-

802756

There are four or five WASH/RINSE temperatures

available – Boosted Hot Wash/Cold Rinse (select

models only), Hot Wash/Cold Rinse, Warm Wash/

Warm Rinse, Warm Wash/Cold Rinse, Cold Wash/

Cold Rinse.

The Energy Saver settings, marked with an

asterisk (*) on some models, show which

temperature settings will use the least energy.

Refer to the Water Te mper atu re section for the

temperature that works best for your garments.

6. Select EXTRA RINSE if desired.

The extra rinse control is useful for detergent

sensitive skin. By pressing the EXTRA RINSE to ON,

the REGULAR, PERMANENT PRESS, and

HANDWASH/DELICATE cycles will each provide an

additional rinse. If the rinse is desired, press the

switch to ON. When the extra rinse is not wanted,

OFF should be selected.

7. Select the cycle according to the type of

fabric being washed. Use the indicator dot on

the cycle selector knob as a guide.

8. Press and hold the START button for two

seconds to start the washer. The DOOR light

will come on after a short delay, water fill will

begin, and wash drum will begin tumbling.

NOTE: Washer door MUST be closed tightly to

start washer.

If items need to be added or removed after a cycle

has started, turn the cycle selector knob to the

OFF position. Wait until the DOOR light goes off

(approximately 45 seconds after cycle has been

stopped), open door, add or remove items, and

start the cycle again.

There is no agitator on this washer. Instead, the

clothing gently tumbles through the water. The

wash action consists of a period of tumbling in one

direction, a brief pause, and then a reverse tumble

in the opposite direction. The pauses are part of

the tumble action and add to the unique cleaning

capabilities of the washer. They are part of the

cycle.

NOTE: There will be extended pauses when

Boosted Hot Wash, if available, is selected

because the water is being heated.

To Change Cycles

If the selected cycle is not the correct cycle for the

fabric being washed, you may change the cycle

selection at any time until the first wash fill is

complete. Once the washer has filled for the first

part of the cycle (the wash portion), the current

cycle must be aborted and a new cycle must be

started.

To change the cycle before the first fill is

complete:

Change the cycle selected on the cycle selector

knob.

WARNI NG

Window may be hot in the Boosted Hot

and Hot wash cycles.

W325

TLW2078N