Alliance Laundry Systems CHM166C 38

Installation/Operation Supplement

6.If desired, select a different cycle at this point or after satisfying vend. The LED indicator for that cycle will light.

7.Add liquid and/or powder supplies to supply dispenser. Refer to Figure 40.

a.Add detergent to compartment 1.

b.Add softener to compartment 3.

B157R

1Detergent

2Bleach

3Softener

Figure 40

8.If the machine is a coin operated unit, add coins. As each coin is added, the display counts down to the amount remaining.

9.If the machine is a card operated unit, insert and remove card per card system instructions.

10.If the unit is interfaced to a central/remote pay system, go to the central/remote pay console, make payment, select the machine, and follow central/remote pay system instructions.

11.Press the desired wash cycle key if it hasn’t already been selected.

NOTE: Once START keypad is pressed, the selected wash cycle is locked in and wash cycle will begin.

12.Press the START keypad.

13.Add bleach if and when prompted (display will show “bLCH”, signal will sound on and off for 45 seconds and Add Bleach indicator lights).

NOTE: If the version of the control in machine is capable of reading temperature and control is not in Audit Mode, pressing the START keypad while a cycle is running will cause display to show temperature. Press START keypad again to revert to minutes remaining shown in display.

14.When cycle is complete, display shows “dOnE”, the Door Open LED lights and door can be opened.

F232145 (EN)