Alliance Laundry Systems CHM166C 36

Installation/Operation Supplement

6.If desired, select a different cycle at this point or after satisfying vend. The LED indicator for that cycle will light.

7.Add liquid and/or powder supplies to supply dispenser. Refer to Figure 35.

a.Add detergent to compartment 1.

b.Add softener to compartment 3.

3

2

1

B157R

1Detergent

2Bleach

3Softener

Figure 35

8.If the machine is a coin operated unit, add coins. As each coin is added, the display counts down to the amount remaining.

9.If the machine is a card operated unit, insert and remove card. Contact the card reader manufacturer for details.

10.If the unit is interfaced to a central/remote pay system, go to the central/remote pay console, make payment and select the machine. Contact the pay system manufacturer for more details.

11.When applicable, add bleach to compartment 2 when the ADD BLEACH LED is lit.

12.Press the desired wash cycle key.

13.Press the START keypad.

14.During first fill, the desired wash cycle can be changed. After first fill has ended, the wash cycle active at that moment remains the chosen wash cycle.

15.When cycle is complete, display shows “donE”.

34

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

F232145 (EN)

Contents

Page Page Table of Contents Notes Safety Information Important Safety Instructions Page Specifications and Dimensions 2 Speed Models (Continued) Door Opening Information Power Consumption Drive Train Information Cylinder Speeds Balance Detection Direct Steam Heating (Optional) Electrical Heating (Optional) Gap Setting for Vibration Switch (Variable-Speedand Fixed-SpeedModels) Table 3 (Continued) Page For 18, 20, 25, 27, 30 and 35 Pound Capacity Machines For 40 and 50 Pound Capacity Variable-Speed and Fixed-SpeedMachines For 60 Pound Capacity Variable-Speedand Fixed-SpeedMachines For 80 Pound Capacity Machines For 125 Pound Capacity Machines Dimensional Clearances Dimensions Machine Capacity Dimensions Dimensions 125 Model Electrical Specifications Page Page Page Page Operation Symbol 30C Description Instructions for EDC Control For machines equipped with a cardreader: If display flashes “SPEC” then “CYCL”, extra options such as 10.Add bleach to container 2 when ADD BLEACH light is lit. Refer to Figure 11. Cycle is complete when display reads “:00” Instructions for Mechanical Timer 5. Select wash cycle. Refer to Figure a.Add detergent to container b.Add softener to container For coin models: For non-coinmodels: Press the Start button. Refer to Figure Instructions for S, P and V Series Microcomputers 5.Add liquid and/or powder supplies to supply dispenser. Refer to Figure 6.Press the Up and Down keys to select wash cycle. Refer to Figure 8.For non-coinmodels: Press the Start key. Refer to Figure When applicable NOTE: To stop a cycle at any time, press the Stop key. Non-coinmodels only Instructions for B Series Microcomputer Page Instructions for A Series