Installation

Step 3: Connect Drain Hose to Drain Receptacle

Remove the drain hose from its shipping position on the rear of the washer by unhooking the hose from the retainer clamp or by removing the shipping tape.

IMPORTANT: Drain receptacle must be capable of handling a minimum of 1-3/8 inch (3.5 cm) outside diameter drain hose.

1

H139I

H139I

1Retainer Clamp

Figure 5

Standpipe Installation

Place the drain hose into the standpipe.

Remove the beaded tie-down strap from accessories bag and place around standpipe and drain hose and tighten strap to hold hose to standpipe. This will prevent the drain hose from dislodging from drain receptacle during use.

RECOMMENDED

HEIGHT

24" TO 36"

(61 TO 91.44 cm)

1

H138I

H138I

1Standpipe 2" (5.08 cm) or 1-1/2" (4 cm)

Figure 6

12

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

800536