Alliance Laundry Systems H2641 24

Operation

Step 4: Set Fabric Selector

Set regular loads at NORMAL or PERM PRESS. Set delicate loads at DELICATE.

H171I

Figure 19

Step 5: Set WASH/RINSE Temperatures

Set at HOT (COLD rinse), WARM (COLD rinse) or COLD (COLD rinse).

NOTE: Always follow manufacturer’s care labels.

H170I

Figure 20

Step 6: Insert Money

Place coin(s) in slide and carefully push in as far as possible and then pull slide out as far as possible. After IN USE light comes on (indicating start of cycle), press the PUSH-TO-STARTbutton.

W297I

Figure 21

Indicator Lights

IN USE

This light will remain on while washer is in use.

DOOR LOCKED

This light will come on after the start button has been pushed and the washer door has locked. It will remain on until the wash cycle has ended.

FINAL SPIN AND TUMBLE

This light will come on at the start of the final spin and remain on until the wash cycle has ended.

CLOSE DOOR

This light will come on if door is not closed tightly. Firmly push door until light goes out.

IMPORTANT: If washer fails to operate properly after installation, make sure electrical service and water supply faucets are turned on. Are all the controls properly set? Have a qualified service person refer to the wiring diagram (located inside of cabinet) and check for broken, loose or incorrect wiring.

NOTE: Once a cycle has started, the door can only be opened by first unplugging the power cord and waiting one minute.

WARNING

To reduce the risk of bodily injury, do not remove laundry from washer until all lights are out, and all moving parts have stopped.

W092

The washer will stop (pause) shortly before the first spin and final spin.

800536