Alliance Laundry Systems H2641 25

Operation Instructions for

MDC Washers

IMPORTANT: Prior to first wash, use an all- purpose cleaner, or a detergent and water solution, and a damp cloth to remove shipping dust from inside of washtub.

Step 1: Set Fabric Selector and Wash Temperature

Operation

Step 2: Add Laundry Supplies

Open dispenser drawer. Measure and add low sudsing detergent (1), bleach (2) and fabric softener (3) to the dispenser drawer (refer to Figure 23). Close dispenser drawer.

IMPORTANT: If using detergents made for topload washers, avoid oversudsing by using 1/2 of the recommended amount.

Push touchpad for NORMAL/HOT, NORMAL/ WARM, PERM PRESS/WARM or DELICATES/ COLD cycle. Light indicates selection.

NOTE: Changes can be made to Fabric Selector setting up until the first fill is complete.

FLW1920N

Figure 22

1Detergent

2Bleach

3Fabric Softener

Figure 23

CAUTION

H284I

Dispenser drawer requires a special tool for removal. Contact a service person if removal is necessary.

W236

800536