Moving Washer to a New Location
To prevent damage while moving the washer, the shipping materials MUST be reinstalled.
Reinstallation of Shipping Materials
Remove front access panel by removing two screws.
Place the shock sleeves on all four shock absorbers. Refer to Figure 11.
Insert hooked end of shipping brace into the open slot of the motor mount. Attach with bolts and lockwashers. Refer to Figure 11.
Reinstall front access panel.
Installation
1
2
4 
3
H336I
1Shock Sleeves
2Motor Mount
3Bolts and Lockwashers
4Hooked End of Shipping Brace
Figure 11
Refer to step 5 for proper procedures whenever the washer is moved.
800536 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 15 |