Maintenance

Before You Call for Service

You may save time and money by checking the following:

If the Washer:

Won’t

Won’t

Won’t

Won’t

Possible Reason – Do This to Correct

Fill

Start

Agitate

Spin

 

 

 

 

 

 

Place coin(s) in slide or drop (metered models only).

 

 

 

 

 

Push timer knob in to start the washer (nonmetered

models only).

 

 

 

 

 

 

 

 

 

Be sure the power cord is plugged all the way into the

electrical outlet.

 

 

 

 

 

 

 

 

 

Close the loading door.

 

 

 

 

 

Check the laundry room fuse or circuit breaker.

 

 

 

 

 

Has the motor overload protector cycled? Refer to

page 33.

 

 

 

 

 

 

 

 

 

 

 

 

Turn on the hot and cold water faucets.

 

 

 

 

 

 

 

 

Was the last spin completed?

 

 

 

 

 

 

 

 

Water is siphoned from the washer during the cycle.

 

 

 

Refer to page 18.

 

 

 

 

 

 

 

 

 

 

 

Are the controls properly set?

 

 

 

 

 

 

 

Have a qualified electrician check polarity and

 

 

grounding. Refer to page 14.

 

 

 

 

 

 

 

 

 

 

 

 

Clean the screens in the water mixing valve and the filter

 

 

 

screens in the fill hoses.

 

 

 

 

 

 

 

 

 

34

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

38857