Software Version sb275a05 15
Version sb275a05
C613-10464-00 Rev H
Level 4
No level four issues
Enhancements
CR00012747 File 3 The upl oad command (upload server=x.x.x.x file=filename.ext) did
not allow files with KEY, CER or CSR extensions to be uploaded from the
switch.
This issue has been resolved, so these file types can now be uploaded.
CR00012786 IP Gateway 3 When a link that had RIP configured on it went down, so that the switch
used an alternative route, output from the command show ip route
sometimes displayed incorrect information when the link came back up.
When the link first comes back up, the route's RIP metric is still 16, so the
alternative route is still the “best” route to the target. However, show ip
route sometimes displayed a disabled route over the original link, with a
RIP metric of 16, as the best route, even though the switch correctly used
the alternative route.
This issue has been resolved.
CR Module Level Description
CR Module Level Description
CR00012616 Core, CURE,
File, Show
-Monitoring of CPU utilisation has been enhanced. You can now set the
switch to capture data about which specific functions the CPU is
executing, and what level of instantaneous usage the CPU is experiencing.
This allows you, in conjunction with your authorised distributor or reseller,
to diagnose the causes of high rates of CPU utilisation on the switch.
For more information and the new commands, see “Extended Monitoring
of CPU Utilisation (CR00012616)” on page 21.