Allied Telesis 8000/8POE manual Installing the Switch on a Desktop

AT-8000/8POE Layer 2 Fast Ethernet Switch Installation Guide

Installing the Switch on a Desktop

You can place AT-8000/8POE Fast Ethernet Switch on a desktop or install it in a 19-inch rack. To install the switch in a rack, refer to “Installing the Switch in a Rack” on page 38.

To place the switch on a desktop, perform the following procedure:

1.Remove all equipment from the package and store the packaging material in a safe place.

2.Turn the switch over and attach the four rubber feet to the bottom of the switch as shown in Figure 6.

TERMINAL PORT RS-232

9			9R	8	6	4	2										9R	8	6	4	2
								PRODUCT LASER				ACT	LINK 10/100									POWER
									1 CLASS
												ACT	LINK 1000
												ACTIVITY PORT UPLINK
SFP															9							PoE
		T-Base 10/100/1000									ACT		LINK 10	ACT	LINK 100
										CURRENT MAX			ERR PD			ON PD						Switch Ethernet Fast POE Port 8
	PORT UPLINK												ACTIVITY PORTON ON MAINDET									8000/8POE-AT
																		7	5	3	1
				7	5	3	1

823

Figure 6. Attaching the Rubber Feet

3.Turn the switch over again and place it on a flat, secure surface (such as a desk or table) leaving ample space around the unit for ventilation.

37