Allied Telesis 8000/8POE manual Installing the Switch in a Rack

Chapter 2: Installation

Installing the Switch in a Rack

To install the AT-8000/8POE Fast Ethernet Switch in a rack, perform the following procedure:

1.If attached, remove the rubber feet using a flat-head screwdriver.

2.Install a bracket on one side of the switch using a Phillips screwdriver and four of the rack-mount screws included with the switch, as shown in Figure 7.

1
3
	5
	7
2		UPLINK
4	10/100/1000		PO	RT
		Base-T
	6
	8			S
				FP
	9R
				9

RS-232	PORT
	TERMINAL

831

Figure 7. Attaching the Rack-Mount Bracket

3.Repeat step 2 to attach the remaining bracket to the other side of the switch.

38