Allied Telesis 8000/8POE manual 832

AT-8000/8POE Layer 2 Fast Ethernet Switch Installation Guide

4.Mount the switch on a 19-inch rack using the four large screws included, as shown in Figure 8

1
3
	5
	7
2		UPLI
4	10/100/1000	NK	T
		Ba	POR
	6	se-T
	8		SFP
	9R
			9

RS-232	PORT
	TERMINAL

832

Figure 8. Mounting the Switch on the Rack

Warning: To prevent electric shock, do not remove the cover. No user-serviceable parts inside. This unit contains hazardous voltages and should only be opened by a trained and qualified technician. To avoid the possibility of electric shock, disconnect electric power to the product before connecting or disconnecting the LAN cables.  E1

Warning: Do not work on equipment or cables during periods of lightning activity.  E2

Warning: Power cord is used as a disconnection device. To de- energize equipment, disconnect the power cord.  E3

Warning: Class I Equipment. This equipment must be earthed. The power plug must be connected to a properly wired earth ground socket outlet. An improperly wired socket outlet could place hazardous voltages on accessible metal parts.  E4

Pluggable Equipment. The socket outlet shall be installed near the equipment and shall be easily accessible.  E5

Caution: Air vents must not be blocked and must have free access to the room ambient air for cooling.  E6

39