12 | SHOW IGMPSNOOPING ROUTERADDRESS | Patch Release Note |
Description This command deletes reserved IP multicast addresses from the list of router multicast addresses. The IP address specified must be within the range
224.0.0.1to 224.0.0.255. This command is only valid if the IGMP snooping router mode is set to IP with the SET IGMPSNOOPING ROUTERMODE command.
SHOW IGMPSNOOPING ROUTERADDRESS
Syntax SHOW IGMPSNOOPING ROUTERADDRESS
Description This command displays information about the list of configured IP multicast router addresses currently configured on the switch (Figure 1).
Figure 1: Example output for SHOW IGMPSNOOPING ROUTERADDRESS
IGMP Snooping Router Address
IGMP Snooping Router Mode ...... IP
Router Address List
224.0.0.4
224.0.0.6
224.0.0.80
224.0.0.43
224.0.0.23
224.0.0.15
224.0.0.60
PCR: 31134 | Module: RSTP | Level: 2 |
Bridges transmitted BPDUs at the rate specified by the local helloTime value when they were not the root bridge. This is the behaviour specified in
PCR: 31135 | Module: IPV6 | Level: 3 |
The ADD IPV6 HOST command accepted an invalid IPv6 address. This issue has been resolved.
PCR: 31140 | Module: FIREWALL | Level: 4 |
The firewall sent an erroneous IPSPOOF attack message when processing large packets. This issue has been resolved.
Patch