32 | SHOW IP IGMP | Patch Release Note |
Modified Command
SHOW IP IGMP
Syntax SHOW IP IGMP [COUNTER] [INTERFACE=interface]
Description This command displays information about IGMP, and multicast group membership for each IP interface.
This enhancement includes the line “Disabled
Figure 3: Example output from the SHOW IP IGMP command.
IGMP Protocol
Status | Enabled |
|
|
Default Query Interval | 125 secs |
|
|
Default Timeout Interval | 270 secs |
|
|
Disabled | ........ 1,5,7 |
|
|
Interface Name | vlan2 (DR) |
|
|
IGMP Proxy | Off |
|
|
Group List |
|
|
|
Group. 238.0.1.2 | Last Adv. 172.50.2.1 | Refresh time 34 secs | |
Ports 3,11,23 |
|
|
|
Group. 224.1.1.2 | Last Adv. 172.50.2.1 | Refresh time 130 secs | |
Ports 2,11,23 |
|
|
|
All Groups | Last Adv. 172.50.1.1 | Refresh time 45 secs | |
Ports 1#,11,23 |
|
|
|
Interface Name | vlan4 | (DR) |
|
IGMP Proxy | Off |
|
|
Group List |
|
|
|
No group memberships. |
|
|
|
Table 7: New parameter in the output of the SHOW IP IGMP command.
Parameter | Meaning |
|
|
Disabled | A list of ports that are prevented from behaving as IGMP all- |
| group ports. |
|
|
Examples To show information about IGMP, use the command:
SHOW IP IGMP
See Also ENABLE IP IGMP ALLGROUP
DISABLE IP IGMP ALLGROUP
Patch