24 | SHOW IGMPSNOOPING ROUTERADDRESS | Patch Release Note |
PCR: 031020 Module: PIM | Level: 2 |
When the switch received a generation ID change message, it was not responding by sending a PIM HELLO message. This issue has been resolved.
PCR: 31028 | Module: BGP | Level: 2 |
BGP did not always send Withdrawn advertisements when a route went down. This issue has been resolved.
PCR: 31069 | Module: IPV6 | Level: 2 |
When adding an IPv6 filter, an error message was displayed stating that the source IP address was not specified, even when the address was specified. This issue has been resolved.
Features in
Patch file details are listed in Table 4:
Table 4: Patch file details for Patch
Base Software Release File | |
|
|
Patch Release Date | |
|
|
Compressed Patch File Name | |
|
|
Compressed Patch File Size | 191102 bytes |
|
|
Patch
PCR: 03816 | Module: IPG | Level: 2 |
When ports were added or removed as a range with the ENABLE IP IGMP ALLGROUPS and DISABLE IP IGMP ALLGROUPS commands, port values were interpreted as 2 separate ports. This issue has been resolved.
Patch