Allied Telesis AT-2701FTXA/ST Guidelines Supported Advanced Properties, Model Advanced Properties

Modifying Advanced Properties

Overview

Guidelines

Supported

Advanced

Properties

The AT-2701 series adapter allows you to modify advanced properties to meet your requirements. To access the advanced properties, you must access Device Manager, then go to each advanced property page.

Here are the guidelines to modifying the advanced properties:

To change the advanced property settings, you must have Administrator privileges.

When you upgrade the driver software, the settings of the advanced properties may change. Verify the settings after upgrading the driver software.

The supported advanced properties depend upon the AT-2701 adapter model and the operating system that the adapter is installed on. See Table 3.

Table 3. Advanced Properties per Model

OS	Model	Advanced Properties
Windows 7	AT-2701FXa	 “Early Tx Threshold” on page 62
		 “Network Address (LAA)” on page 63
		 “PCI PME” on page 65
		 “Speed/Duplex” on page 67
		 “Vlan Id” on page 70
		 “Wake on Magic Packet” on page 72
		 “Wake on Pattern Match” on page 74
	AT-2701FTXa	 “Early Tx Threshold” on page 62
		 “Network Address (LAA)” on page 63
		 “PCI PME” on page 65
		 “Speed/Duplex (100Mb Fiber)” on page 68
		 “Speed/Duplex (Copper)” on page 69
		 “Vlan Id” on page 70
		 “Wake on Magic Packet” on page 72
		 “Wake on Pattern Match” on page 74

58