AT-2701 Series Fast Ethernet Adapter Installation Guide

3.Select an empty, non-shared PCI slot and remove the faceplate.

Keep the faceplate in a safe place. You may need it for future use. See Figure 9.

Figure 9. Removing the Faceplate From PCI Slot

Note

If you cannot locate or know how to find a PCI slot, refer to the documentation that came with your system.

4.Remove the network adapter card from the shipping package and store the packaging material in a safe location.

Caution

Wear a grounding device and observe electrostatic discharge precautions when installing the network adapter card in a system. Failure to observe this caution could result in damage to the card.

5.Applying even pressure at both corners of the card, push the adapter card until it is firmly seated in the PCI slot.

Make sure the card is securely seated. See Figure 10 on page 30.

29

Page 29
Image 29
Allied Telesis AT-2701FXA/SC, AT-2701FXA/ST, AT-2701FTXA/ST manual AT-2701 Series Fast Ethernet Adapter Installation Guide