Allied Telesis AT-2701FXA/SC, AT-2701FXA/ST, AT-2701FTXA/ST, AT-2701FTXA/SC manual Pci Pme

AT-2701 Series Fast Ethernet Adapter Installation Guide

PCI PME

The PCI PME (Power Management Event) property enables the Wake-on- LAN (WOL) function to wake the adapter up from a low-power mode, based on the settings of the “Wake on Magic Packet” and “Wake on Pattern Match” properties.

For example, if the PCI PME and Wake on Magic Packet properties are enabled, the adapter wakes up from a low-power mode when receiving a Magic Packet. If the PCI PME, Wake on Magic Packet, and Wake on Pattern Match properties are enabled, the adapter wakes up from a low- power mode when receiving a Magic Packet or a packet that matches one of the patterns specified in the operating system.

To enable or disable the PCI PME property, do the following:

1.Access the Advanced Properties.

See “Accessing Advanced Properties” on page 60.

2.Select PCI PME in the Property box.

The PCI PME page is displayed as shown in Figure 34.

Figure 34. PCI PME Page

65