Allied Telesis AT-8000S - page 43

Safety Statements

Electrical Safety Notices

Page 43

Warning

5. Power cord is used as a disconnection device. To de-energize equipment, disconnect the power cord.

Warning

6. Class I Equipment. This equipment must be earthed. The power plug must be connected to a properly

wired earth grounded socket outlet. An improperly wired socket outlet could place hazardous voltages on

accessible metal parts.

Warning

7. Pluggable Equipment. The socket outlet shall be installed near the equipment and shall be easily

accessible.

Caution

8. Air vents must not be blocked and must have free access to the room ambient air for cooling.

Warning

9. Operating Temperature. This product is designed for a maximum ambient temperature of 40° degrees

C.

Warning

10. All Countries: Install product in accordance with local and National Electrical Codes.

Warning

11. As a safety precaution, install a circuit breaker with a minimum value of 15 Amps between the

equipment and the DC power source.

Warning

12. Always connect the wires to the LAN equipment first before you connect the wires to the circuit

breaker. Do not work with HOT feeds to avoid the danger of physical injury from electrical shock. Always

be sure that the circuit breaker is in the OFF position before connecting the wires to the breaker.

Contents

Main Page Table of Contents Page Page Preface How This Guide is Organized Document Conventions Contacting Allied Telesis Chapter 1. Product Description Features IEEE Standards AT-8000S/16 Front Panel AT-8000S/16 Back Panel AT-8000S/24 Front Panel AT-8000S/24 Back Panel AT-8000S/24POE Front Panel AT-8000S/24POE Back Panel AT-8000S/48 Front Panel AT-8000S/48 Back Panel AT-8000S/48POE Front Panel AT-8000S/48POE Back Panel Ports Description 10/100Base-T Fast Ethernet Ports 10/100/1000Base-T Uplink Ethernet Ports SFP Port DB-9 Console Port Mode LEDs Figure 11: Mode LEDs 24/48 Port Device Stacking LEDs Figure 12: Stacking LEDs Product Description Port LEDs 10/100 Base-T Fast Ethernet RJ-45 Port LEDs Figure 13: 10/100Base-T Fast Ethernet RJ-45 Port LEDs Allied Telesis AT-8000SSwitch 10/100/1000 Base-T/Combo Ethernet RJ-45 Port LEDs Figure 14: 10/100/1000 Base-T/Combo Ethernet RJ-45 Port LEDs Product Description 24/48 Port Device SFP/Combo Port LEDs Figure 15: SFP Port LEDs Allied Telesis AT-8000SSwitch 24/48 Port Device System LEDs Figure 16: SFP Port LEDs Power LED Diagnostic LED Stacking Ports LEDs Allied Telesis AT-8000S Switch Chapter 2. Installation Preparing for Installation Allied Telesis AT-8000S Switch Site Requirements Unpacking Package Contents Installing the Device Desktop or Shelf Installation Allied Telesis AT-8000S Switch Figure 18: Installing Rubber Feet Rack Installation Installation Figure 19: Attaching the Mounting Brackets Connecting the Device Connecting the Switch to a Terminal AC Power Connection Page Chapter 3. Stacking Understanding the Stack Topology Stacking Figure 20: Stacking Ring Topology Stacking Chain Topology Stacking Members and Unit ID Configuring Stacking Stacking Allied Telesis AT-8000SSwitch Chapter 4. Initial Configuration Configuration Overview Configuration User Name Chapter 5. Troubleshooting Page Appendix A. Technical Specifications Physical Specifications Weight Environmental Specifications Power Specifications Compliance Standards Cable, Port, and Pinout Information Pin Connections for the 10/100/1000 Ethernet Interface Page Page Appendix B. Safety Statements Laser Safety Notices Electrical Safety Notices Page Page Page Page Telecommunications Compliance Notices Index