Allied Telesis AT-8000S - page 46

Page 46

Allied Telesis AT-8000SSwitch

Installation Guide

Warning

30. Remove all metal jewelry, such as rings and watches, before installing or removing a line card from a

powered-on chassis.

Warning

31. Use dedicated power circuits or power conditioners to supply reliable electrical power to the device.

Warning

32. The chassis may be heavy and awkward to lift. Allied Telesis recommends that you get assistance

when mounting the chassis in an equipment rack.

Warning

33. Do not look directly at the fiber optic cable ends or inspect the cable ends with an optical lens.

Warning

34. This unit might have more than one power cord. To reduce the risk of electric shock, disconnect all

power cords before servicing the unit.

Warning

35. The power input must be provided from SELV source only, per IEC 60950. Do not connect to a

centralized DC battery bank.

Caution

36. UL recognized wires of 18 AWG minimum should be provided by the installer.

Caution

37. UL recognized wires of 22 AWG minimum should be provided by the installer.

Caution

38. Power to the hub must be sourced only from the adapter.

Contents

Main Page Table of Contents Page Page Preface How This Guide is Organized Document Conventions Contacting Allied Telesis Chapter 1. Product Description Features IEEE Standards AT-8000S/16 Front Panel AT-8000S/16 Back Panel AT-8000S/24 Front Panel AT-8000S/24 Back Panel AT-8000S/24POE Front Panel AT-8000S/24POE Back Panel AT-8000S/48 Front Panel AT-8000S/48 Back Panel AT-8000S/48POE Front Panel AT-8000S/48POE Back Panel Ports Description 10/100Base-T Fast Ethernet Ports 10/100/1000Base-T Uplink Ethernet Ports SFP Port DB-9 Console Port Mode LEDs Figure 11: Mode LEDs 24/48 Port Device Stacking LEDs Figure 12: Stacking LEDs Product Description Port LEDs 10/100 Base-T Fast Ethernet RJ-45 Port LEDs Figure 13: 10/100Base-T Fast Ethernet RJ-45 Port LEDs Allied Telesis AT-8000SSwitch 10/100/1000 Base-T/Combo Ethernet RJ-45 Port LEDs Figure 14: 10/100/1000 Base-T/Combo Ethernet RJ-45 Port LEDs Product Description 24/48 Port Device SFP/Combo Port LEDs Figure 15: SFP Port LEDs Allied Telesis AT-8000SSwitch 24/48 Port Device System LEDs Figure 16: SFP Port LEDs Power LED Diagnostic LED Stacking Ports LEDs Allied Telesis AT-8000S Switch Chapter 2. Installation Preparing for Installation Allied Telesis AT-8000S Switch Site Requirements Unpacking Package Contents Installing the Device Desktop or Shelf Installation Allied Telesis AT-8000S Switch Figure 18: Installing Rubber Feet Rack Installation Installation Figure 19: Attaching the Mounting Brackets Connecting the Device Connecting the Switch to a Terminal AC Power Connection Page Chapter 3. Stacking Understanding the Stack Topology Stacking Figure 20: Stacking Ring Topology Stacking Chain Topology Stacking Members and Unit ID Configuring Stacking Stacking Allied Telesis AT-8000SSwitch Chapter 4. Initial Configuration Configuration Overview Configuration User Name Chapter 5. Troubleshooting Page Appendix A. Technical Specifications Physical Specifications Weight Environmental Specifications Power Specifications Compliance Standards Cable, Port, and Pinout Information Pin Connections for the 10/100/1000 Ethernet Interface Page Page Appendix B. Safety Statements Laser Safety Notices Electrical Safety Notices Page Page Page Page Telecommunications Compliance Notices Index