Stack Installation Guide for 8100S Series Switches
19
Port prioritization
10/100/1000Mbps TwistedPair Ports
Here are the basic features of the 10/100/1000 Mbps twisted pair ports:
Two ports per switch
10Base-T, 100Base-TX, and 1000Base-T compliant
IEEE 802.3u Auto-Negotiation compliant
Auto-MDI/MDIX
100 meters (328 feet) maximum operating distance
IEEE 802.3x flow control in 10/100Base-TX full-duplex operation
IEEE 802.3x backpressure in 10/100Base-TX half-duplex
operation
IEEE 803.3z 1000Base-T flow control
Support for jumbo frames up to 10KB
RJ-45 connectors
SFP Slots Here are the basic features of the SFP slots:
Two slots per switch
Support 100Mbps 100Base-FX or 1000Mbps 1000Base-SX/LX
transceivers
Note
The SFP slots are paired with the 10/100/1000Base-TX twisted pair
ports on the switch to form combo ports. For information, refer to
“SFP Slots” on page 34.
Note
SFP transceivers must be purchased separately. For a list of
supported transceivers, contact your Allied Telesis distributor or
reseller.
Stacking Ports Here are the basic features of the stacking ports on the 8100S Series
switches:
Two stacking ports
10Gbps total bandwidth
High-definition Multimedia Interface (HDMI) connectors