Stack Installation Guide for 8100S Series Switches
69
Unpacking the Switch
Refer to the figures in this section to verify the contents of the shipping
container of the switch. If any items are missing or damaged, contact your
Allied Telesis sales representative for assistance.

8100S Series

Switches

The 8100S Series switches, except the AT-8100S/24C Switch, come with
the components listed in Figure 19.
Figure 19. Components of the 8100S Series Switches
One 8100S Series switch
Two rack mounting brackets
One 2 m (6.6 ft) local management cable with
RJ-45 (8P8C) and DB-9 (D-sub 9-pin)
connectors.
Eight bracket screws
Two regional AC power cords
(Not included with DC
powered switches.)
One 1 m (3.3 ft) stacking cable with two type A
HDMI connectors.