GSM Series User Manual

3-2-2. Port Configuration

The Port Configuration section allows the administrator to Enable or Disable a port, turn auto negotiation on or off for a particular port and also force the speed and duplex settings of each port. The administrator can also Enable or Disable the flow control settings for each port.

Fig. 3-14

Function Name:

Port Configuration

Function Description:

Allows the Administrator to manually enable or disable a port, disable auto-negotiation and force the speed of a port and also allow flow control to be enabled or disabled for each port.

Parameter Description:

Port No:

Displays every port on the switch, if the port is paired with another port you will see that port 15 and port 15b will be displayed. This applies for the GSM- 16T2SFP and GSM-24T2SFP where they have 2 copper ports that are paired with 2 SFP Fibre ports. You will notice that one of the paired ports will be greyed out depending on the port being used.

State:

Shows whether the port is enabled or disabled, if Enabled traffic can be transmitted and received from that port, if Disabled no traffic can be passed through this port. If a cable is plugged into a port and the port is set to disabled the link light will become active but no data will pass through that port.

Default: Enabled

34

Alloy Computer Products Pty Ltd Copyright ©2006

Page 38
Image 38
Alloy Computer Products GSM-16T2SFP, GSM-24T2SFP, GSM-8T16SFP user manual Port Configuration, Port No