GSM Series User Manual
Join Time:
Used to specify the Join Time in units of 100th of a Second, Valid time range is 20
–100. Default: 20
Leave Time:
Used to specify the Leave Time in units of 100th of a Second, Valid time range is 60 – 300.
Default: 60
Leave All Time:
A time period for the announcement that all registered devices are going to be
Default: 1000 unit time
Default Applicant Mode:
There are two types of participant modes that are supported, normal participant and
Normal:
The switch participates normally in the GARP protocol exchanges. This is the default setting.
Non-Participant:
In this mode the switch does not send or reply to any GARP messages, it just listens to messages and reacts to any received GVRP BPDU.
Default Registrar Mode:
There are three types of administrative control values that can be set, they are normal registrar, fixed registrar and forbidden registrar.
Normal:
The Registrar responds normally to incoming GARP messages. This is the default setting.
Fixed:
The Registrar ignores all GARP messages and all members remain in the registered (IN) state.
Forbidden:
The Registrar ignores all GARP messages and all members remain in the unregistered (EMPTY) state.
Restricted Mode:
This function is used to restrict the creation of a dynamic VLAN when this port receives GVRP BDU. There are two modes Enabled and Disabled.
Disabled:
The dynamic VLAN will be created when this port receives a GVRP BDU. This is the default setting.
75
Alloy Computer Products Pty Ltd Copyright ©2006