GSM Series User Manual
switch has a warm start.
Link Down:
Tick the required trap method check box to enable a trap to be sent when a port on the switch loses link.
Link Up:
Tick the required trap method check box to enable a trap to be sent when a port on the switch establishes link.
Authentication Failure:
Tick the required trap method check box to enable a trap to be sent when authorisation to the switches management fails.
User Login:
Tick the required trap method check box to enable a trap to be sent when a user logs on to the switches management.
User Logout:
Tick the required trap method check box to enable a trap to be sent when a user logs out of the switches management.
STP Topology Changed:
Tick the required trap method check box to enable a trap to be sent when the STP Topology has changed.
STP Disabled:
Tick the required trap method check box to enable a trap to be sent when STP has been disabled.
STP Enabled:
Tick the required trap method check box to enable a trap to be sent when STP has been enabled.
LACP Disabled:
Tick the required trap method check box to enable a trap to be sent when LACP has been disabled.
LACP Enabled:
Tick the required trap method check box to enable a trap to be sent when LACP has been enabled.
LACP Member Added:
Tick the required trap method check box to enable a trap to be sent when a LACP Member has been added.
LACP Port Failure:
Tick the required trap method check box to enable a trap to be sent when a LACP Port has failed.
GVRP Disabled:
Tick the required trap method check box to enable a trap to be sent when GVRP has been disabled.
100
Alloy Computer Products Pty Ltd Copyright ©2006
