6 Press and hold the TITLE button for at least 3 seconds to record the title.
NOTES
•When the memory capacity for the disc titles is used up, the display shows "FULL DATA" to indicate that no more title can be memorized.
•When you want to erase a title, enter the " " symbol into all spaces.
Erasing Disc Title
1 Press the TITLE button to select the disc titling mode. Then press and hold it for at least 3 seconds.
2 Press and hold the :/J button for at least 2 seconds to activate the title erasing mode. The disc title in the display will blink.
3
4
5 Press and hold the TITLE button for at least 3 seconds to cancel the disc title erasing mode.
Searching for Titled Discs
If a CD is titled, you can do a search for it. (To title CDs, refer to "Titling Discs" on page 24.)
1
2 Press the g DN or f UP button to select the desired disc title.
3 Press the T.S.M. button to play the selected disc. The unit will automatically search for the disc and begin play.
4 Press the T.S.M. button for at least 2 seconds to cancel the disc searching mode.
NOTE
This function cannot be performed when using a multi- changer switching device.
Changer
Multi-Changer Selection
Alpine's
1 Press the SOURCE button to activate the CD Changer mode.
Alternatively, press the SOURCE button on the Remote Control
SOURCE | BAND |
2 Press the BAND button or the
3 The CD Changer Selection mode remains active for 3 seconds after Step 2 is performed. Press the BAND button until the desired CD Changer indicator appears on the display.
NOTE
If the selected CD Changer is not connected, the display will show "NO CHGRX."
Alternatively press the BAND button on the Remote Control until the desired changer indicator appears on the display.
4 To operate the selected changer, see "CD Operation" section.
NOTE
For further details about the external input (AUX) when using