Alpine CDA-7876RB, CDA-7873R Setting the AUX Mode V-Link, Demonstration, 10-EN, Basic Operation

Press and hold the SETUP button for at least 3 seconds.

Basic

SOURCE TUNE MODE/BAND

g DN

f UP

CENTER f SETUP

Basic Operation

Setting the AUX Mode (V-Link)

You can input TV/video sound by connecting an optional Ai-NET/RCA Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C) to this component.

1

2 Press the f UP button repeatedly to select "AUX."

Each press of the f UP button changes the modes as shown:

NOTE

If you press the g DN button the display scrolls in

reverse sequence.

→FM-LV → REG → PTY31 → HI-FI/NORMAL/STABLE → AMBER∗ → DIM → SUB

DEMO ← AUX (AUX Mode Display Setting∗∗ ) ← SCR ← MUTE ← BEEP ←

∗CDA-7873R/TDA-7587R Only ∗∗ Displayed after AUX ON is set.

3 Press the TUNE button to toggle the mode between "AUX ON" and "AUX OFF."

NOTES

•The initial setting at the factory is AUX OFF.

•You can set the AUX mode display by pressing the g DN or f UP button after AUX ON is set, select the AUX mode display setting, and then press the TUNE button.

•When connecting the Versatile Link Terminal (KCA- 410C), you can set two AUX mode displays.

5 To adjust the volume, etc., first press the SOURCE button and select the AUX mode, then make the necessary adjustment.

NOTE

When using the Versatile Link Terminal (KCA-410C), you can connect two external inputs. To select the mode, press the BAND button on the unit.

Demonstration

This unit has the Demonstration feature which simulates the display functions on the display panel.

1 Press and hold the SETUP button for at least 3 seconds.

2 Press the f UP button to select the "DEMO" mode. Each press changes the modes as shown:

→FM-LV → REG → PTY31 → HI-FI/NORMAL/STABLE → AMBER∗

DEMO ← AUX ← SCR ← MUTE ← BEEP ← SUB ← DIM ←

∗CDA-7873R/TDA-7587R Only

NOTE

If you press the g DN button the display scrolls in

reverse sequence.

4 Press the SETUP button to return to the normal mode.

10-EN