you to enter the current code and the new code. It also prompts you to ver- ify the new code by entering it again.
NOTE: Avoid using access codes similar to the emergency numbers, such as 112, to prevent accidental dialling of the emergency number.
Phone line change (Menu 4-6-7)
You can allow or prevent the selection of a phone line.
When Not allowed is selected, you cannot use the ‘Phone line in use’ function. To allow or prevent the phone line change, you need PIN 2 code.
Restore factory settings (Menu 4-7)
You can reset some of the menu set- tings to their original values. The se- curity code is needed for this function.
Call divert (Menu 5)
This network service is used to for- ward incoming calls to your voice- mailbox (only voice calls) or to another number. Divert options not supported by your network operator may not be shown.
1.Select the Call divert menu. The di- vert modes available are:
•Divert all voice calls without ring- ing
•Divert when busy for voice calls only
•Divert when not answered for voice calls only
•Divert when phone off or no cover- age voice calls are diverted when your phone switched off or outside the network service area.
•Divert when phone off, no answer or no coverage voice calls are di- verted when they are not an- swered, or your phone is busy, switched off or outside the net- work service area. This function is available only if your SIM card supports it.
•Divert all fax calls
•Divert all data calls
•Cancel all diverts all diverts are set off.
2.For a mode you may select
•Activate to set the divert mode on.
•Cancel to set the divert mode off.
•Status to show the call types af- fected by the divert mode.
•Set delay to specify the time af- ter which the calls are diverted.
Several divert options may be activat- ed at the same time.
When all calls are diverted, 
is shown on standby mode.
