Silent mutes all ringing tones

Meeting quiet beep

Outdoor loud ringing tone

Pager silent, flashes lights and the number of the caller

Headset 1

Car 2

2.To customise the profiles, scroll to the desired profile , for example General, and press Options.

3.Select Personalise and press OK.

If you select Activate, the select- ed profile is only set on. The pro- file cannot be customised.

NOTE: When the phone is con- nected to the car kit PPH-1 or headset HDC-5, the Activate func- tion is not available.

4.Scroll to the desired setting, for example Ringing tone, and press Select.

5.While in the list of ringing tones, scroll to the desired option and press OK.

Tone settings for profiles

Incoming call alert

This setting defines how the phone will notify you about an incoming voice call. The options available are: Ringing, Ascending, Ring once, Beep Once, Caller Groups and Off.

Caller groups

The phone will ring only when calls are received from phone numbers which belong to the selected caller group. (Also a graphic is shown, if specified to the group.)

Scroll to the desired group and press Mark to select or Unmark to deselect it. Repeat this as many times as nec- essary. Next, press Back and then Yes to save or No to discard the changes. See also ‘Phone book‘, ‘Caller groups’.

Ringing tone

Sets the ringing tone for voice calls.

Ringing volume

Sets the volume level for the ringing and message alert tones.

1Headset will not appear in the Profiles list unless headset HDC-5 is connected to your phone. However, the settings for the Headset will remain in the menu once connected.

2Car will not appear in the Profiles list unless car kit PPH-1 is connected to your phone. However, the settings for the Car will remain in the menu once connected.

42Copyright © 2004 Nokia. All rights reserved.

Page 42
Image 42
Nokia 8210 manual Tone settings for profiles, Incoming call alert, Ringing tone, Ringing volume, Caller groups