Alpine CDA-7876RB Turning Power On and Off, Display Angle Adjustment, 6-EN, Basic Operation

Models: TDA-7587R TDA-7588RB CDA-7873R CDA-7876RB

1 44
Download 44 pages 50.63 Kb
Page 8
Image 8
Turning Power On and Off

Basic

POWER

TUNE

 

MODE/BBE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

g DN f UP SETUP

ANGLE 89 c

Basic Operation

About Demonstration

This unit is equipped a Demonstration function. Soon after resetting the unit or after turning the unit on the first time, the demonstration starts automatically.

To cancel the demonstration, refer to “Demonstration” on page 10.

Turning Power On and Off

1 Press the POWER button to turn on the unit.

NOTE

The unit can be turned on by pressing any other button except the eject c button.

The volume level gradually increases to the previous level you were listening to before the unit was turned off. Press and hold the POWER button for at least 3 seconds to turn off the unit.

NOTE

The very first time the power is turned on, the volume will start from level 12, the BBE will be on in the tuner mode.

Display Angle Adjustment

Movable display

The movable display may be adjusted to 3 different angles depending upon user preference.

1 Press the ANGLE 89 button to adjust the angle of the movable display.

NOTES

The display will close a half minute after the ignition key is turned to the OFF position.

The adjusted angle of the display is stored in memory. There is no need to re-adjust the angle when the power is turned back on.

CAUTION

Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.

6-EN

Page 8
Image 8
Alpine CDA-7876RB, CDA-7873R, TDA-7588RB Turning Power On and Off, Display Angle Adjustment, 6-EN, Basic Operation