Alpine CDA-7873R, CDA-7876RB, TDA-7588RB, TDA-7587R owner manual Installation, 39-EN

Installation

Metal plate

Detachable

Front panel

Caution

When you install this unit in your car, do not remove the Detachable Front Panel.

If the Detachable Front Panel is removed during installation, you might press too hard and warp the metal plate that holds it in place.

1

	Rubber Cap
	(Included)
Bracket	Hex Bolt

		(Included)
	Dashboard
	Mounting sleeve
	(Included)
	CDA-7876RB/CDA-7873R/TDA-7588RB/TDA-7587R
	Slide mounting sleeve from main unit (see
	"Removal" on this page). Slide the mounting
2	sleeve into the dashboard.
	Metal Mounting Strap
		Screw
	∗	Bolt Stud
	Hex Nut (M5)
	CDA-7876RB/CDA-7873R/TDA-7588RB/TDA-7587R
	When your vehicle has the Bracket, mount the
	long hex bolt onto the rear panel of the CDA-
	7876RB/CDA-7873R/TDA-7588RB/TDA-7587R
	and put the Rubber Cap on the hex bolt. If your
	vehicle does not have the Mounting Support,
	reinforce the head unit with the metal mounting
	strap (not supplied). Connect all the leads of the
	CDA-7876RB/CDA-7873R/TDA-7588RB/TDA-
	7587R according to details described in the
	CONNECTION section.
	NOTE
	For the screw *, provide a proper screw to the chassis
	installing location.

3 Slide the CDA-7876RB/CDA-7873R/TDA- 7588RB/TDA-7587R into the dashboard. When the unit is in place, make sure the locking pins are fully seated in the down position. This can be done by pressing firmly in on the unit while pushing the locking pin down with a small screwdriver. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Install the Detachable Front Panel.

Lock pin

Removal

1Remove the detachable front panel.

2Use a small screwdriver (or similar tool) to push the locking pins to the "up" position (see above drawing). As each pin is unlocked, gently pull out on the unit to make sure it does not re-lock before unlocking the second pin.

3Pull the unit out, keeping it unlocked as you do so.

<JAPANESE CAR>

Front frame

Screws (M5 ⋅ 8)

CDA-7876RB/CDA-7873R/(Included)

TDA-7588RB/TDA-7587R

Mounting Bracket

39-EN