Installation and Connections

Before installing or connecting the unit, please read the following and pages 2 and 4 of this manual thoroughly for proper use.

Warning

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or product damage.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to electrical shorts.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.

Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

Caution

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire's insulation from being cut by the metal edge of the hole.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.

Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

37-EN

Page 38 Page 40
Page 39
Image 39
Alpine TDA-7587R, CDA-7876RB, CDA-7873R, TDA-7588RB Installation and Connections, Do not Splice Into Electrical Cables
Page 38 Page 40

TDA-7587R, TDA-7588RB, CDA-7873R, CDA-7876RB specifications

Alpine is renowned for its innovative audio solutions, producing high-quality car audio products that enhance in-vehicle listening experiences. Among their stellar range, the TDA-7588RB, CDA-7873R, TDA-7587R, and CDA-7876RB stand out for their advanced features and capabilities, catering to the needs of audiophiles and everyday users alike.

The Alpine TDA-7588RB is a cutting-edge receiver that combines modern technology with exceptional sound performance. It features Bluetooth connectivity, allowing seamless streaming of music and hands-free calling. The receiver is equipped with a built-in amplifier that delivers powerful sound, ensuring distortion-free audio even at higher volumes. The customizable equalizer settings enable users to fine-tune audio output to match their preferences. Moreover, the TDA-7588RB supports various audio formats, making it versatile for different media sources.

Similarly, the Alpine CDA-7873R showcases retro aesthetics with contemporary features. It incorporates an impressive built-in amplifier, producing clear and dynamic sound across various frequencies. With its CD player and MP3 playback capabilities, the CDA-7873R caters to diverse music formats. The receiver includes a highly-responsive LCD display, providing easy navigation through playlists and settings. Its comprehensive equalizer and crossover controls further enhance the listening experience, allowing for detailed sound adjustments.

The TDA-7587R is designed for efficiency and performance. Not only does it include Bluetooth technology for wireless convenience, but it also supports USB input for direct playback from various devices. The receiver’s user-friendly interface makes it simple to adjust settings and access music. Its high-performance audio processing technology delivers crisp sound reproduction, making it compatible with various sound systems.

Last but not least, the CDA-7876RB is packed with features aimed at delivering optimal audio quality. This receiver boasts advanced sound processing capabilities alongside Bluetooth support for easy connectivity. The high-voltage pre-output allows connection to external amplifiers, enhancing overall sound dynamics. The built-in SiriusXM readiness enables users to enjoy satellite radio, providing access to a plethora of channels.

All four Alpine models are designed with user experience in mind, featuring intuitive controls and elegant designs that complement any vehicle interior. With their advanced technologies and audio performance, the Alpine TDA-7588RB, CDA-7873R, TDA-7587R, and CDA-7876RB reinforce Alpine’s commitment to delivering groundbreaking audio solutions that cater to every driver’s musical taste.
Top Page Image Contents