Alpine CDA-7876RB, CDA-7873R Radio Operation, Switching the Tuner Mode, Manual Tuning, 14-EN

Radio

SOURCE TUNEBAND

g DN	f UP	SETUP	Preset buttons
			(1 through 6)

Radio Operation

Switching the Tuner Mode Manual Tuning

The CDA-7876RB/CDA-7873R/TDA-7588RB/ TDA-7587R incorporates the MAX TUNE Pro for the highest quality tuner audio. Moreover, you can choose between two settings to suit your own personal sound preferences usage.

1 Press and hold the SETUP button for at least 3 seconds.

2 Press the g DN or f UP button to select the "HI-FI or NORMAL or STABLE." Each press of the f UP button changes the modes as shown:

→FM-LV → REG → PTY31 → HI-FI/NORMAL/STABLE → AMBER∗

DEMO ← AUX ← SCR ← MUTE ← BEEP ← SUB ← DIM ←

∗CDA-7873R/TDA-7587R Only

3 Press the TUNE button to switch the TUNER mode.

→HI-FI → NORMAL → STABLE

NORMAL: Standard setting

HI-FI: Sound quality priority setting

STABLE: Noiseless priority setting

NOTES

•The initial setting at the factory is "NORMAL."

•If you find the sound is very noisy while listening to the tuner in the HI-FI mode, we recommend you change to the NORMAL mode.

1 Press the SOURCE button until a radio frequency appears in the display.

2 Press the BAND button repeatedly until the desired radio band is displayed.

Each press changes the band:

→ FM1 → FM2 → FM3 → MW → LW

3 Press the TUNE button repeatedly until "DX SEEK" and "SEEK" disappear from the display.

NOTE

The initial mode is DX SEEK.

4 Press the g DN or f UP button to move downward or upward one step respectively until the desired station frequency is displayed.

NOTE

The ST indicator appears on the display when a Stereo FM station is tuned in.

4 When the setting is completed, press the SETUP button to return to the normal mode.

14-EN