Sound (Beep) Guide Function
This function will give audible feedback with varying tones depending upon the button pressed.
1
2 Press the f UP button repeatedly to select "BEEP."
Each press of the f UP button changes the modes as shown:
NOTE
If you press the g DN button the display scrolls in reverse sequence.
→
DEMO ← AUX ← SCR ← MUTE ← BEEP ← SUB ← DIM ←
∗
3 Press the TUNE button to toggle the mode between "BEEP ON" and "BEEP OFF."
NOTE
The initial setting at the factory is BEEP ON.
4 Press the SETUP button to set the selected mode.
Basic
Turning Mute Mode On/Off
If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device. This function can be turned ON or OFF from the head unit by following procedure below.
1 Press and hold the SETUP button for at least 3 seconds.
2 Press the f UP button to select the "MUTE" mode. Each press changes the modes as shown:
→
DEMO ← AUX ← SCR ← MUTE ← BEEP ← SUB ← DIM ←
∗
NOTE
If you press the g DN button the display scrolls in reverse sequence.
3 Press the TUNE button to turn on or off the Mute mode.
Each press toggles between the "MUTE ON" and "MUTE OFF" modes.
NOTE
The initial setting at the factory is "MUTE ON."
4 Press the SETUP button again to return to normal operation.